What should be paid attention to in the later maintenance of centrifugal juicer

Centrifugal juicers have gained wide recognition in the home and commercial beverage industry for their excellent juicing efficiency and convenient operation. However, with the increasing frequency of use, the later maintenance of the equipment is particularly critical. Reasonable maintenance can not only significantly extend the service life of the centrifugal juicer, but also ensure the stability of the juicing effect and the excellent quality of the juice.

Regular cleaning
The cleaning of the centrifugal juicer should be carried out immediately after each use. Juice residue and pomace, if retained inside the equipment for a long time, are very likely to cause bacterial growth and odor. To avoid such problems, timely cleaning is crucial.
During the cleaning process, the components should be disassembled strictly in accordance with the manufacturer's instructions. The main components include blades, filters, pomace containers and juice containers. Each component should be cleaned separately to ensure that there is no residual material.
When cleaning the blades and filters, it is recommended to use soft cleaning tools such as soft brushes or sponges, and avoid using rough materials such as steel wool to prevent scratching the surface. For the pomace container and juice container, warm water and neutral detergent can be used for thorough cleaning. After cleaning, all parts should be dried in a well-ventilated environment to ensure that there is no residual moisture to prevent the motor from rusting or bacterial growth.

Regular inspection
The blades and filters are the most easily worn parts of the centrifugal juicer, and their wear degree needs to be checked regularly. If the blades are found to be blunt or the filter is clogged, be sure to replace them in time. This not only helps to maintain a good juicing effect, but also reduces the burden on the machine and extends the overall service life of the equipment.
Before each use, be sure to check the integrity of the cable and plug. If any wear or damage is found, it should be replaced immediately to ensure safe use. The aging of the cable may cause safety hazards such as short circuits, so regular inspections are particularly important.
In addition, the cleaning of the base of the main unit should not be ignored. Regularly check the base for foreign matter or dirt accumulation, and keep it clean to ensure the heat dissipation effect and normal operation of the motor.

Lubrication and maintenance
For some models of centrifugal juicers, the motor needs to be lubricated and maintained regularly. According to the manufacturer's specific recommendations, the use of appropriate lubricating oil can effectively reduce friction and extend the service life of the motor. However, attention should be paid to the amount of lubrication to avoid grease from penetrating into the circuit part and causing unnecessary failures.
The seal ring plays a key role in preventing juice leakage in the centrifugal juicer. Check the wear of the seal ring regularly. If it is found to be aging or damaged, it needs to be replaced in time to ensure the normal use of the equipment.